Table of Contents
Advertisement
Scanning
Scanning
Software applications for scanning
Your scanner is controlled through scan, copy or imaging software installed
on your PC.
Optimal full featured scanning functionality is obtainable through scan
and copy software specifically developed for compatibility with your
scanner model. See the scanner manufacturer's website for information on
scanner software and compatible third-party applications.
Simple scanning functionality - Many common imaging applications
support TWAIN and WIA interfacing and will thereby support simple
scanning tasks through a limited range of settings and control options.
Running applications from the scanner panel
Normally you would control the scanner from your PC through your scan
software user interface. However, your scanner also supports one-touch
buttons that enable you to trigger your software and actions from the
scanner panel. When a button is pressed, a scan is initiated and the result
is loaded into the application triggered. You configure your one-touch
buttons through WIDEsystem and your compatible scanning software.
Please refer to the on-line help in these applications for instructions.
The one touch buttons on the panel
Nextimage Scan/Copy button
The green button duplicates the scan/copy button in the Nextimage
software. Once you set Nextimage to scan or copy with the right settings,
pressing the green Scan/Copy button on the scanner activates the process
from the scanner rather than from the PC. This is useful for example to
facilitate fast and convenient feeding and scanning of multiple pages (see
Batch scanning below).
Batch scanning
Batch scanning involves jobs where you want to feed and scan a whole set
of originals that require equal scan settings. The basic steps are:
1. In Nextimage, set your scan or copy settings (size, type, image
adjustments..) for the batch. Your settings will apply to ALL the
documents in the batch.
2. Feed the batch's documents one by one, pressing the green Nextimage
Scan/Copy button at the scanner for each document.
3. If using a scan or copy software other than Nextimage, you can
configure and use the one-touch buttons to batch scan.
Read you scan software's on-line help pages for specific information on
batch scanning with the application.
NOTE: The availability of Batch scanning options will depend on your
scan/copy software and its level of compatibility with the scanner model.
26
Hide quick links:
Advertisement
Table of Contents
