Modifying And Adapting The Simulation Graphics; Enlarging Or Reducing The Graphical Representation - Siemens SINUMERIK 840D sl Operating Manual

3.10.9

Modifying and adapting the simulation graphics

3.10.9.1

Enlarging or reducing the graphical representation

Requirement
The simulation or the simultaneous recording is started.
Procedure
Note
Program change during viewing
If you have enlarged or reduced a segment and change the program during simulation or
simultaneous recording, the view switches back to the automatic scaling for the current
blank.
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
1. Press the <+> and <-> keys if you want to enlarge or reduce the
graphical representation now displayed.
The graphical representation is enlarged or reduced from the center.
- OR -
Press the "Details" and "Zoom +" softkeys if you want to increase the
size of the segment.
- OR -
Press the "Details" and "Zoom -" softkeys if you want to decrease the
size of the segment.
- OR -
Press the "Details" and "Auto zoom" softkeys if you want to
automatically adapt the segment to the size of the window.
The automatic scaling function "Fit to size" takes account of the
largest expansion of the workpiece in the individual axes.
Machine the workpiece
3.10 Simulating machining
111