Procedure
Several magazines
If you have set up several magazines, then the "...relocate from magazine... location... to..."
window appears after pressing the "Relocate" softkey.
Select the desired magazine and location, and confirm your selection with "OK" to load the
tool.
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
1.
Select the "Parameter" operating area.
2.
Press the "Magazine" softkey.
3.
Position the cursor on the tool that you wish to relocate to a different
magazine location.
4.
Press the "Relocate" softkey.
The "... relocate from location ... to ..." window appears on the screen.
The "... location" field is initialized with the number of the first empty
magazine location.
5.
Press the "OK" softkey to relocate the tool to the suggested location.
- OR -
Enter the location number you require and press the "OK" softkey.
- OR -
Press the "Spindle" softkey to load a tool into the spindle and press
the "OK" softkey.
..
The tool is moved to the specified magazine location or the spindle.
Tool management
6.8 Magazine
173