Displaying The Program Runtime And Counting Workpieces - Siemens SINUMERIK 840D sl Operating Manual

Machine the workpiece

3.12 Displaying the program runtime and counting workpieces

Procedure
3.12 Displaying the program runtime and counting workpieces
To gain an overview of the program runtime and the number of machined workpieces, open
the "Times, Counter" window.
Displayed times
● Program
● Program remainder
120
1. Select the "Machine" operating area.
2. Press the "AUTO" key.
3. Press the menu forward key and the "Synchron." softkey.
The "Synchronized Actions" window appears.
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
Pressing the softkey the first time shows how long the program has already been running.
At every further start of the program, the time required to run the entire program the first
time is displayed.
If the program or the feedrate is changed, the new program runtime is corrected after the
first run.
Here you can see how long the current program still has to run. In addition, you can
follow how much of the current program has been completed in percent on a progress
bar.
The display only appears when the program is run a second time.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal