Display Program Level - Siemens SINUMERIK 840D sl Operating Manual

Machine the workpiece
3.3 Display current program block
Procedure
3.3.3

Display program level

You can display the current program level during the execution of a large program with
several subprograms.
Display of program level
The following information will be displayed:
● Level number
● Program name
● Block number, or line number
Requirement
A program must be selected for execution in "AUTO" or "MDA" mode.
Procedure
80
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. A program is selected for execution and has been opened in the
"Machine" operating area.
2. Press the "Basic blocks" softkey.
The "Basic Blocks" window opens.
3. Press the <SINGLE BLOCK> key if you wish to execute the program
block-by-block.
4. Press the <CYCLE START> key to start the program execution.
The axis positions to be approached, modal G functions, etc., are
displayed in the "Basic Blocks" window for the currently active program
block.
5. Press the "Basic blocks" softkey once again to hide the window again.
Press the "Program levels" softkey.
The "Program levels" window appears.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal