Machine the workpiece
3.7 Controlling the program run
Skip levels, activate
Check the corresponding checkbox in order to skip the required block level.
Note
The "Program control - skip blocks" window is only available when more than one skip level
is set up.
Proceed as follows
...
92
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
1.
Select the "Machine" operating area.
2.
Press the "AUTO" or "MDA" key.
...
3.
Press the "Prog. cntrl." and "Skip blocks" softkeys.
The "Program control" window appears and shows a list of block
levels.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal