Siemens SINUMERIK 840D sl Operating Manual page 171

Magazine list icons
Icon/
Designation
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Procedure
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
1. Select the "Parameter" operating area.
2. Press the "Magazine" softkey.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip
provides a short description.
The tool is preselected.
The magazine location is positioned at the change
position.
The magazine location is positioned at the loading
position.
The magazine location is disabled.
Tool management
6.8 Magazine
171