Siemens SINUMERIK 840D sl Operating Manual page 34

Introduction
1.4 Operator interface
Requirement
The control has been set to Chinese or Korean.
Procedure
Editing characters
Editing the dictionary
34
1. Open the screen form and position the cursor on the entry field and
press the <Alt +S> keys.
The editor is displayed.
2. Enter the desired phonetic notation.
3. Click the "Cursor down" button to access the dictionary.
4. Repeated clicking of the "Cursor down" button displays all the entered
phonetic notations and the associated selection characters.
5. Press the "BACKSPACE" softkey to delete entered phonetic
notations.
6. Press the number key to insert the associated character.
When a character is selected, the editor records the frequency with
which it is selected for a specific phonetic notation and offers this
character at the top of the list when the editor is next opened.
1. Select the dictionary editing function in the selection box.
The editor provides a further line in which the combined characters
and phonetic notations are displayed.
2. Enter the desired phonetic notation in the phonetic input field.
Various characters are displayed for this phonetic notation, from which
you can select a character by entering either of the appropriate
number (1 to 9).
You can toggle the input cursor between the compound phonetic
notations field and the phonetic input field by pressing the <TAB> key.
Combined characters are cancelled via the <BACKSPACE> key.
3. Press the <SELECT> key to take a combined phonetic notation into
the dictionary.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal