Operating, Conservation And Transport Conditions; Receipt Of The Equipment - Ingeteam Ingecon mWind Interface Installation Manual

Ingeteam Power Technology, S.A.

3. Operating, conservation and transport conditions

Failure to comply with the instructions provided in this section could cause damage to the equipment.
Ingeteam assumes no liability whatsoever for damages derived from non-compliance with these
instructions.

3.1. Receipt of the equipment

Receipt
On receipt, please check the terms indicated in the Delivery Note, sign the box: "Firma Receptor Mercancía" (signa-
ture of the recipient of the goods) and return the signed copy to the sender's address.
Do not unpack the equipment until it is ready to be installed. It should remain in a horizontal position at all times.
The packaging dimensions are as follows:
Cardboard box with foam
Unpacking the equipment
The equipment is clearly identified by its own, unique serial number. This number should be referred to in all commu-
nications with Ingeteam. It is indicated as S/N on the nameplate, as shown below.
14
INGECON
®
Modelo
Cod. I+d
S/N
IP65
Type of packaging
INGETEAM POWER
TECHNOLOGY, S.A.
Avda. Ciudad de la Innovación 13
31621 Sarriguren (Navarra) SPAIN
www.ingeteam.com
μWINd INTERfACE
μWind Interface
Ingecon
®
AAY7500
100010060001
2011
Ingecon μWind Interface label
®
Weight (Kg) Length x Depth x Height (mm)
7 400 X 400 X 240
Installation manual
AAY2000IKI06