Firmware Version 1.0.3.13; Firmware Version 1.0.2.21 - Grandstream Networks UCM6100 Series User Manual

Firmware Version 1.0.3.13

•
Added Fail2Ban support for SIP authentication. [Fail2ban]
•
Added "Auto Record" option for trunk.
•
Added "Digit Timeout" option and voice prompt "Language" selection for IVR. [Table 66: IVR
Configuration Parameters]
•
Added "Direct Dial Voicemail Prefix" feature code to directly dial or transfer to extension's voicemail.
[Table 84: UCM6100 Feature Codes]
•
Added "Enforce Strong Passwords" option. [Table 85: Internal Options/General]
•
Added FXS MWI Mode. [Table 98: PBX Interface Settings]
•
Added system events with alert and Email notification support. [System Events]
•
Added new web page for recording files. [Recording Files]

Firmware Version 1.0.2.21

•
Added weight information. [Table 1: Technical Specifications]
•
Added NTP server support. [NTP Server]
•
Added Czech language for web GUI display. [Web GUI Languages]
•
Added VLAN support. "Layer 2 QoS 802.1Q/VLAN tag" and "Layer 2 QoS 802.1p priority value" options
for network port settings are added. [Network Settings]
•
Updated LDAP client configurations information.
•
Added sample Email settings. [Email]
•
Added "Enable Pick Extension" and "Extension Segment" options for auto provisioning settings.
•
Changed one of the discovery method from "SIP MESSAGE (OPTIONS)" to "SIP MESSAGE
(NOTIFY)" in zero-config feature.
•
Added pickup group feature. [Table 84: UCM6100 Feature Codes]
•
Added PSTN detection instructions for "Auto Detect" and "Semi-auto Detect". [PSTN Detection]
•
Added "Auth ID" option for SIP register trunk configuration. [Table 52: Create New SIP Trunk]
•
Added LDAP sync options for peer SIP trunk. [Table 52: Create New SIP Trunk]
•
Changed the default setting of outbound route "Privilege Level" from "Internal" to "International" to avoid
potential misconfiguration and security risk.
•
Added DISA and Fax to IVR key press event options. [Table 66: IVR Configuration Parameters]
•
Added "Min Message Time" option in voicemail settings. [Table 67: Voicemail Settings]
•
Added Fax setting samples. [FAX SERVER]
•
Added DISA support for inbound route and IVR.
•
Added Event List support to monitor local extensions and remote extensions. [BLF AND EVENT LIST]
•
Added feature code *0 for "Disconnect". [Table 84: UCM6100 Feature Codes]
•
Added feature code *8 for "Pickup Extension" in pickup group feature. [Table 84: UCM6100 Feature
Codes]
•
Added "Record Prompt" and "Custom Name of Pickup Group" options in internal options. [Table 85:
Internal Options/General]
•
Added warning information for "Allow Guest Call" option to avoid potential security risk caused by
misconfiguration. [Table 89: IAX Settings/General]
UCM6100 Series User Manual
P a g e 31
|