User Authentication; Set The Elisense System - W&H Lisa VA131-17 Instructions For Use Manual

User authentication

FUNCTION AVAILABILITY
PIN MANAGEMENT
PIN "0000" is assigned as default to each new user. It has to be
changed at the first login. When the PIN is reset the default value
"0000" is reassigned.
CHANGE YOUR PIN
Change your PIN the first time you use the sterilizer and if your PIN
has been reset. This will prevent other users to use your account.
On the homepage tap
1
Tap your user name.
2
Enter your current PIN and tap
3
to confirm.
Tap .
4
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
> >
Enter your new PIN and tap
5
confirm: a confirmation message
with your new PIN appears.
Tap and then to go back to
6
the previous page.
WHAT TO DO IF YOU FORGET YOUR PIN
If...
you are a common user
you are the administrator

Set the Elisense system

THE ELISENSE SYSTEM
The Elisense system permits the touch screen LEDs to turn on in
different colours and mode to signal the cycle status, the load
temperature and the presence of a new message/pop-up on the
sterilizer screen.
Getting started
to
Then...
contact the administrator
contact your authorized service provider
33