Time Configuration; Configure Sip Trunk Service Address - Grandstream Networks IPVT10 Administration Manual

Table of Contents

4. When finished updating the ports, click on the "Save" button to save the configuration, and click on the button "Apply

Now" to confirm the customized service ports. The server will reboot to apply the changes.

Note

The customized service ports cannot be duplicated.

The ports below cannot be set as customized service ports: "21，25，1718，3000，3306，5070，5071，5072，5073，

5074，5080，6379，6380，6381，8006，8008，8010，8012，8080， 8081，8083，8090，9080，80000，111， 2049，

3002， 3003，3004".

If the service ports are set incorrectly, users cannot use the corresponding services normally.

Time Configuration

Users could check the current time and time-zone of the server and correct it at any time to avoid the meeting time

inaccurate or cannot be launched issues.

Please, refer to the following steps:

1. Login IPVT10 Web UI.

2. Click on "Service Configuration", and configure the "Time Settings" options, as the figure is shown below:

3. It shows the current time of the server by default.

4. Users could set whether to synchronize the SNTP server time. If there is no available SNTP server, users could adjust the

date and time manually.

5. Users could click on "Save" to update the server time immediately.

(Optional) Users could configure the SIP Trunk server address based on the actual requirements. If users configure this service,

users could use the PBX platform or PSTN Trunk server to connect via IPVideoTalk conference system, user also cloud set

DialPlan to dial out the 3 party PBX platform.

Connecting to the IPVideoTalk Conference System with 3 Party Platform (PBX or PSTN)

To connect the IPVideoTalk Conference System with a 3 party platform, please refer to the following steps:

1. Login IPVT10 Web Management UI.

2. Go to "Service Configuration��SIP Trunk Settings", and users will see the page below:

Figure 21: Time Settings

Table of Contents