Changing The Motor Belt - Vision VE810 S5 User Manual

130 Vision VE810 S5 User Manual
NOTE: Place a paper towel underneath the leadscrews to prevent over spray as shown below.
6.4

Changing the Motor Belt

Over a period of time, the VE810 motor belt will wear. When the motor belt wears, it will stretch and
cause the spindle to slip or stall. When this happens, the motor belt generally needs to be changed. The
following explains the procedure for changing the motor belt.
Cover Removal
Top Cover Screws
Remove the two top cover screws (shown below).
© 2018 Vision Engraving & Routing Systems