Table of Contents
Advertisement
Maintenance
125
6.3
Motion System Cleaning & Lubrication
Materials Needed
3-in-1 oil
Teflon-free Silicon Spray
Phillips Screw Driver
11/32" Nut Driver
Paper Towels
Isopropyl Alcohol
NOTE: With the machine POWERED OFF, you can move the carriage, table and spindle manually to
access areas for cleaning and lubricating the machine. To move the table, press on the front or rear edge
of the table. To move the carriage, press on the left or right side of the carriage cover. To move the
Spindle, press on the top of the Spindle to move the Spindle down and press on the bottom of the
Spindle to move it up.
Cover Removal
Top Cover Screws
Remove the two top cover screws (shown below).
© 2018 Vision Engraving & Routing Systems
Advertisement
Table of Contents
