Vision VE810 S5 User Manual page 144

144 Vision VE810 S5 User Manual
Edge Clamps
This clamp is designed to secure engraving materials from the top surface and avoids bowing in most
applications. This clamp will hold material thicknesses of .020, .032, .062, and .125 by rotating the
clamp and tightening a thumbscrew.
Corner Clamps
This clamp is designed to hold down square or rectangular plates. By lining up the "V" cut-out of the
clamp with the corner of the plate, the engraver is allowed maximum engraving space. It will hold material
as thin as 1/32".
© 2018 Vision Engraving & Routing Systems