Table of Contents
Advertisement
108
Vision VE810 S5 User Manual
Press the jogger button on the machines touch screen. Now press the magnifying glass to turn on the
laser. Use the arrows to jog to the top edge of the piece of acrylic. Write down the Y position readout.
(For rectangular items move the laser pointer to the top left corner of your engraving area.
Now Jog to the left most edge of the piece of acrylic. Write down the X position. Repeat moving the
spindle to the right and bottom and write down the X/Y positions. (For rectangle objects , you can use
the X and Y readouts for the upper left and the lower right corners of your engraving area.
In the Vision 10 software we will now draw guidelines using the measurements we wrote down. To add a
guideline, click with the right mouse button anywhere within the plate area. Now select Edit Guides.
Select the horizontal guide icon in the top left corner and enter your Y measurement in the Y entry field.
Click add and then enter your second Y location. Press add again and then click on the vertical icon in
the top left corner of the window. Add both X values that you measured earlier.
© 2018 Vision Engraving & Routing Systems
Advertisement
Table of Contents
