Table of Contents
Advertisement
Installation
43
4
The Front Panel
Home Screen
The home screen contains four buttons: Home Machine, Job Folder Screen, Jog/Offset Screen, and
Settings Screen. The home screen also has a Data Receive light that is green when the machine is
receiving data from the computer and blank all other times.
Home Machine
Every time you power on the machine the Home Machine button will be Yellow. Press the Home
Machine button to energize the motors, have the machine find the limit switches, and set the machine
home location. After the initial home set the first press of the Home Machine button sends the spindle to
the current offset and the second press sends the spindle to the machine home, checks the limit
switches, and sets the current offset to home or offset number 1.
Job Folder Screen
The Job Folder Screen contains five buttons. The up arrow moves the cursor up one position. The down
arrow moves the cursor down one position. The green right arrow selects the file highlighted by the
cursor. The trash can deletes the file highlighted by the cursor. The X button exits this screen and jumps
to the screen above. Any jobs in the machine will be displayed under the Saved Jobs heading on the top
left of the screen. If there are more jobs saved then fit on the screen you must use the up and down
arrows to move to the desired job.
© 2018 Vision Engraving & Routing Systems
Advertisement
Table of Contents
