Vision VE810 S5 User Manual page 32

32 Vision VE810 S5 User Manual
If the Address is not set to 192.168.5.101, it will need to be changed. Press the tools icon.
Enter the numbers 192.168.5.101 with the numbers on the LCD. If you make a mistake, you can press
the left arrow to erase a number.
Press the green check mark to accept the value.
The Mask value will be blank. Press the green check mark a second time and the mask will change to
255.255.255.0.
If the Mask does not change to this value, enter it with the numbers on the LCD.
The LCD should now look like below:
© 2018 Vision Engraving & Routing Systems