Vision VE810 S5 User Manual page 44

44 Vision VE810 S5 User Manual
Jog/Offset Screen
This screen displays the spindle location and allows manual control of the X, Y, and Z position. The user
can set seven different offsets locations and set a surface for engraving when not using the proximity
sensor. The display in the top left corner of the screen shows the current X, Y, and Z spindle location.
The current X and Y offset location is displayed on the top right of the screen. The Jog/Offset screen has
thirteen buttons that control various functions. The Offset Number button scrolls through all of the offset
numbers. Pressing this button increases the offset number by one and goes from 1 to 9. The Preview
button shows the outline of the current job and does nothing if there are no jobs in the machine. The X+,
X-, Y+, Y- jog the X and Y axes in that direction. The Jog Speed button toggles the X and Y motion
between slow, medium and fast. The Z+ and Z- arrows jog the Z axis up and down and are usually used
to set the surface. The jog speed button has no effect on the Z jog speed as this is constant.
© 2018 Vision Engraving & Routing Systems