Vision VE810 S5 User Manual page 46

46 Vision VE810 S5 User Manual
Settings Screen
The Settings Screen contains four buttons: Connectivity Screen, Tools Screen, Go To Location Screen
and Exit. This Settings screen also shows the machine Serial number.
Connectivity Screen
Mode: indicates if the machine is currently using a static IP address or using DHCP to obtain an IP
address from the connected computer or network. Addr: shows the current IP address of the machine.
Mask: shows the current Sub net Address of the machine. Change allows you to type in an IP and a sub
net address when in the static mode. The mode button allows you to toggle between Static and DHCP.
To set a static IP address press the mode button until static is displayed. Addr will be red then type in
the full IP address including (.) and then hit the Enter button. The Mask may be red now and using the
numbers type in the mask address and hit the enter button. The screen will say changing IP and then
the Addr and Mask will be displayed.
© 2018 Vision Engraving & Routing Systems