Table of Contents
Advertisement
116
Vision VE810 S5 User Manual
Type in the text or import the graphics you wish to use and center them in the plate.
Now, we need to set the home position (set offset) for the item we are engraving. Move the spindle to the
center of the engraving area. In this case, it is the center of the 3.0" piece of acrylic. Press the Set Offset
button on the engraver. This is now the center of the engraving area for our job. The below picture shows
the spindle positioned over the center of the engraving area.
© 2018 Vision Engraving & Routing Systems
Advertisement
Table of Contents
