Table of Contents
Advertisement
Maintenance
135
Install the new brush into the motor housing, replace the caps and machine covers.
6.6
Cleaning the Fan
Weekly preventative maintenance should be performed to ensure reliable operation of your machine. It is
recommended that the input fan filter be removed weekly and cleaned to ensure proper cooling of the
electronics.
1. Unplug the power cable that goes into the back of the machine.
2. Remove the filter guard by using a small flat blade screwdriver to pop the guard open.
3. Remove the filter and blow out the filter with low-pressure compressed air.
4. Replace the filter and filter guard by snapping it back in place.
Cooling Fan Filter and Cover
© 2018 Vision Engraving & Routing Systems
Advertisement
Table of Contents
