Moog MSD C2 Operation Manual page 2

moog
ID no.: CA97555-001 Date: 04/2018
C2 C3 C4
MSD Single-Axis Servo Drive Compact Operation Manual
ID no.: CA97555-001, Rev. 5.3
Date: 04/2018
Applicable as from firmware version: V1.25-01
The German version is the original of this Operation Manual.
MSD Single-Axis Servo Drive Compact high-performance drives
The modularity of the MSD Single-Axis Servo Drive Compact guarantees you optimum
integration into the machine process. Whether in high-speed field bus communication
with the central multi-axis machine controller or with distributed programmable Motion
Control intelligence in the servo drive, the MSD Single-Axis Servo Drive Compact is a
master of both.
C5
We reserve the right to make technical changes.
This Operation Manual has been prepared based on DIN EN 82079-1. The content
was compiled with the greatest care and attention, and based on the latest information
available to us.
We should nevertheless point out that this document cannot always be updated in line
with ongoing technical developments in our products.
Information and specifications may be subject to change at any time. For information on
the latest version please visit drives-support@moog.com
MSD Single-Axis Servo Drive Compact Operation Manual 2