Moog MSD C2 Operation Manual page 39

Technical data
Technical data C08336-xxx-yyy
Continuous rated
10 A
current
4 x 1,5 mm² + 2 x 1 mm²
Cable cross-section
(4 x 0.0024 in² + 2 x 0.0016 in²)
-40 bis +125 °C
Temperature range
(-40 to +275 °F)
Connector pin
2
4
1
Wiring
PE
5
6
Connector
housing
Connector type Size 1
1) yyy stands for length in meters; standard length: 1 m (3.28 ft), 5 m (16.40 ft), 10 m (32.80 ft), 15 m (49 ft), 20 m (65 ft), 50 m (164 ft). Further length on request
2) xxx-001 for standard configuration option, further options on request
Table 4.15 Technical data motor cab
NOTE:
Cores 5 and 6 (PTC) are required only for motors in which the motor PTC
cannot be connected via the encoder cable. In the case of servomotors with
resolver, the PTC is connected via the resolver cable.
moog
ID no.: CA97555-001 Date: 04/2018
CB05708-xxx-yyy
1),2) 1),2)
TBD
4 x 4 mm² + 2 x 1,5 mm²
(4 x 0.0062 in² + 2 x 0.0023 in²)
TBD
Wiring Connector pin Wiring
U 2 U
VV 4 VV
WWW 1 WWW
yellow / green PE yellow / green
Brake + / white 5 Brake + / white
Brake - / black 6 Brake - / black
Connector
Monitor Monitor
housing
Size 1
CA44958-xxx-yyy CB00076-xxx-yyy
1),2)
44 A
4 x 6 mm² + 2 x 1,5 mm² 4 x 10 mm² + 2 x 1,5 mm²
(4 x 0.0093 in² + 2 x 0.0023 in²) (4 x 0.00155 in² + 2 x 0.0023 in²)
-50 bis +90 °C
(-58 to +194 °F)
Connector pin Wiring Connector pin
U U U
V VV V
W WWW W
PE yellow / green PE
+ Brake - / white +
- Brake - / black -
Connector Connector
Monitor
housing housing
Size 1
MSD Single-Axis Servo Drive Compact Operation Manual
CA98676-xxx-yyy
1),2)
61 A 82 A
4 x 16 mm² + 2 x 1,5 mm²
(4 x 0.0248 in² + 2 x 0.0023 in²)
TBD TBD
Wiring Connector pin Wiring
U U
VV V
WWW W WWW
yellow / green PE yellow / green
Brake + / white + Brake + / white
Brake - / black - Brake - / black
Connector
Monitor Monitor
housing
Size 1 Size 1
1),2)
U
VV
39