Installation Overview - Extron electronics TouchLink TLP Pro 725C Series User Manual

Installation
Overview
This section provides an overview of the installation process. Follow the links for a more detailed
explanation of each step.
1.
2.
Before starting to install the TLP Pro 725C, download and install the latest versions of the
following software:
GUI Designer — For designing layouts for Extron TouchLink Pro touchpanels and third
…
party touch interfaces.
Global Configurator Plus and Professional — For setting up and configuring the
…
control processor and touchpanel.
Toolbelt — Provides device discovery, device information, firmware updates,
…
and configuration of network settings, system utilities, and user management for
TouchLink Pro devices.
Global Scripter —
Provides an integrated development environment for Extron control
…
systems programming.
See Configuration Software
Before starting to install the TLP Pro 725C, obtain the following network information from
your network administrator:
Dynamic Host Configuration Protocol (DHCP) status (on or off). If DHCP is off, you
…
also require:
IP address
…
Subnet mask
…
Gateway
…
User name — This can be either admin or user.
…
Password — By default, this is
…
MAC address — Make a note of the touchpanel MAC address, which can be found on
…
the label on the base.
TLP Pro 725C Series Touchpanels • Installation Overview
on page 25.
extron (for either admin or user ).
4