Related Manuals for Labnet MPS 1000
Summary of Contents for Labnet MPS 1000
- Page 1 Labnet MPS 1000 Mini Plate Spinner Instruction Manual Catalog Numbers: C1000 C1000-100V C1000-230V...
- Page 2 Table of Contents 1.0 Introduction ................. . .1 2.0 Symbols and Conventions .
- Page 3 1.0 Introduction The Labnet MPS-1000 Mini Plate Spinner is designed for quick spins of samples in PCR plates. Primarily designed for use with 96- or 384-well plates and small volumes, it will accommodate skirted, non-skirted and semi-skirted styles. With the use of the adapter you may spin half plate, 8 or 12 x 0.2 μL strips, and individual PCR tubes.
- Page 4 5.0 Installation The Labnet MPS-1000 Mini Plate Spinner should be placed on a clean, flat surface with sufficient space around it for ventilation. Be sure that both the bench and the unit’s rubber feet are clean. Plug the power cord into the back of the unit and turn the power switch knob (on the back of the unit) to the On position.
- Page 5 8.0 Limited Warranty Corning Incorporated (Corning) warrants that this product will be free from defects in material and workmanship for a period of one (1) year from date of purchase. CORNING DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.
- Page 6 To request certificates, please contact us at www.labnetlink.com. Warranty/Disclaimer: Unless otherwise specified, all products are for research use or general laboratory use only.* Not intended for use in diagnostic or therapeutic procedures. Not for use in humans. These products are not intended to mitigate the presence of microorganisms on surfaces or in the environment, where such organisms can be deleterious to humans or the environment.
Need help?
Do you have a question about the MPS 1000 and is the answer not in the manual?
Questions and answers