Page 1
P2002 (FastPette Pro) P2000 (FastPette V2) This quick guide is intended to provide a brief overview of the main features and operation of Labnet pipet controllers. For detailed information, please refer to the User Manual that can be found at www.labnetlink.com...
Page 2
Input: 100-240V, 50/60Hz, 0.2A; output: DC 9V. FastPette Pro only Charging process is indicated by: FastPette Pro: successive lighting of “bars”. Full charging time: 7 to 8 hours. The batteries are charged when all 3 “bars” are displayed simultaneously.
Page 3
Manual Speed Control • Speed can be controlled manually by pressing the trigger buttons Mode Control FastPette Pro: Press the MODE button until the display shows the correct mode – BLOW OUT (arrow) or GRAV (drop). FastPette V2: Change position of the MODE switches.
Page 4
Safety Notes WARNING! Risk of injury CAUTION: Risk of damage to the device or errors in pipetting of liquids. Before starting the work with the pipet controller every user should read these operating instructions carefully. CAUTION: • Using the device inconsistently with the operating instructions may result in damaging the device.
Page 5
Warranty The Labnet FastPette™ Pro and FastPette V2 pipet controllers are covered by a 1 (one) year limited warranty. For more information on the warranty limitations refer to full version of the User Manual available at...
Page 6
For additional product or technical information, visit www.labnetlink.com or contact your local sales office. N O R T H A M E R I C A E U R O P E t 800.492.1110 CSEurope@corning.com t 978.442.2200 France t 0800 916 882 A S I A / PA C I F I C Germany Australia/New Zealand...
Need help?
Do you have a question about the FastPette Pro and is the answer not in the manual?
Questions and answers