Output Parameter - Mitsubishi Electric MELSEC QS SERIES User Manual

5
PARAMETER SETTING

5.2.2 Output parameter

The following is the output parameter setting procedure.
Method of wiring of output
Set a wiring method for output.
Output dark test selection
Set whether the diagnostic function "Output dark test function" is executed or not and whether the
diagnostic function of the connected device is executed.
Output dark test pulse OFF time
Set the OFF pulse width used in the output dark test.
(No setting is required when "Not execute" is selected for "Output dark test selelction".)
Start
End
Figure 5.13 Flowchart for the output parameter setting
(1) in this
section
(2) in this
section
(3) in this
section
5.2 Parameter Details
5.2.2 Output parameter
1
2
3
4
5
6
7
8
5
- 18