Chapter1 Overview; Safety Programmable Controller Product List; Features - Mitsubishi Electric MELSEC QS SERIES User Manual

Programmable controller cc-link safety system remote i/o module
Hide thumbs Also See for MELSEC QS SERIES:
Table of Contents

Advertisement

1
OVERVIEW

CHAPTER1 OVERVIEW

This User's Manual describes the specifications, handling and wiring methods of the
safety remote I/O module of the CC-Link Safety system.

1.1 Safety Programmable Controller Product List

Product Name
CC-Link Safety system
remote I/O module

1.2 Features

The following describes the features of the safety remote I/O module.
(1) Highest level of safety approval acquired
(2) Space-saving system design
(3) Improvement of wiring work efficiency
1
- 1
1.1 Safety Programmable Controller Product List
QS0J65BTB2-12DT
QS0J65BTB2-12DT-K
QS0J65BTS2-8D
QS0J65BTS2-4T
* 1: S-mark is a safety certification issued by Korea Occupational Safety and Health Agency (KOSHA).
The safety remote I/O module has acquired certification of the highest safety level
(SIL3 of IEC 61508, Category 4 of EN 654-1, and Category 4 performance level "e" of
EN ISO 13849-1) applicable to programmable controllers.
The safety-related system with high security can be configured.
Compared to the system with the safety relay, this system can be configured with a
smaller space.
Adopting a 2-piece terminal block allows shortened wiring work hours so that incorrect
wiring can be avoided at module replacement.
In addition, multiple COM terminals avoid the necessity to add a relay terminal block.
Model
A safety I/O module connected to external
devices. The module has eight safety input points
and four safety output points, and sends/receives
safety data to/from the safety programmable
controller over CC-Link Safety.
An S-mark
remote I/O module
A safety input module connected to external
devices. The module has eight safety input points
and sends/receives safety data to/from the safety
programmable controller over CC-Link Safety.
A safety output module connected to external
devices. The module has four safety output points
and sends/receives safety data to/from the safety
programmable controller over CC-Link Safety.
Description
*1
certified CC-Link Safety system

Advertisement

Table of Contents
loading

Table of Contents