5
PARAMETER SETTING
CHAPTER5 PARAMETER SETTING
This chapter describes the parameter setting of safety remote I/O module.
The following must be considered for safety remote I/O module before setting parameters.
The parameters of the safety remote I/O module are written via the safety master module
when the following operation is performed;
5
- 1
• Determine the type of certification to be obtained from the third-party certification
organization.
• Determine the devices to be connected, wiring methods, and diagnostic functions
compliant with the certification.
• Reset operation or power OFF
master station
• Reset operation or power OFF
ON of the safety CPU module on the safety
ON of the safety remote I/O module