Mitsubishi Electric MELSEC QS SERIES User Manual page 45

5
PARAMETER SETTING
(1) Parameter setting method
The parameters of the safety remote I/O module are set on the Network parameter
setting screen in GX Developer.
For the operation method of GX Developer, refer to the "GX Developer Version 8
Operating Manual".
The parameter setting method using GX Developer is shown below.
(a) Display of station information setting screen
Select [Parameter] [Network parameter]
Station information button to display the station information setting screen.
Figure 5.1 CC-Link setting screen
Figure 5.2 Station information setting screen
CC-Link button
1
2
3
4
5
6
7
8
5
- 2