Precautions When Moving The Machine - Sega Mushiking Owner's Manual

3) Incorrect
4) Correct
(P. 25)

8. PRECAUTIONS WHEN MOVING THE MACHINE

[!] WARNING
● When moving the machine, be sure to pull out the plug from the power supply.
Moving the machine with the plug still inserted can cause the power cord to be
damaged, resulting in a fire and/or electric shock.
● When moving the machine on the floor, remove the hold brackets and retract
the adjusters, and ensure that the casters make contact with the floor. Pay
careful attention so that the casters do not run over power cords and earth wires.
Damaging the power cords can cause an electric shock and/or short circuit.
● When the casters are in contact with the floor, it is possible that the cabinet
can move under its own weight if placed on an uneven area. Please be careful.
● When lifting the cabinet, be sure to hold the handles and the bottom part.
Lifting the cabinet by holding other portions may damage parts and installation
portions due to the empty weight of the cabinet, and may cause personal injury.
[!] CAUTION
Do not push the monitor cover or molded parts. This may cause damage to the
components, and the pieces may in turn cause injury.
Do not apply pressure to the cabinet's molded parts when moving the cabinet. There is a risk of breaking
components and/or causing personal injury. When moving, be sure to use the handles at the upper back end
of the cabinet.
FIG. 8
1) MONITOR COVER
2) HANDLES
3) Do not apply pressure to the monitor cover or other molded parts.
「Mushiking#1-eng.doc」 最終印刷日時：2010/01/14 14:16:00
27/27