Sega Mushiking Owner's Manual page 20

Table of Contents

Advertisement

「Mushiking#1-eng.doc」 最終印刷日時:2010/01/14 14:16:00
(P. 19)
7. MANAGEMENT CHIP AND MUSHIKING CARDS
[!] WARNING
● Turn off the power prior to using the card dispenser.
● Do not load used cards as they may jam or cause damage to the equipment.
IMPORTANT
(STOP)
Do not perform any of the following actions to avoid damaging the machine.
● Removing the Management Chip or turning the power on/off when the red
Management Chip reader/writer "BUSY" lamp is flashing.
● Removing/inserting Management Chips while a game is in progress.
● Inserting Management Chips/Cards designed for other machines or game
versions.
● Loading more than the maximum number of cards (600). Doing so can result in
card jamming or faulty dispensing.
7-1 INSTALLING MANAGEMENT CHIP
The Management Chip is supplied with the card set for use with this machine.
MANAGEMENT CHIP HOLDER
1. Turn off the power switch inside the door.
2. Loosen the screw locking the Management Chip holder.
3. Insert the Management Chip firmly into the Management
Chip reader/writer slot.
4. Turn on the power switch inside the door.
5. If the "EMPTY LAMP" lights up, there may be a
malfunction. Check that the chip is correctly inserted.
20/27

Advertisement

Table of Contents
loading

Table of Contents