Precautions To Be Heeded When Moving The Machine - Sega VIRTUA COP Owner's Manual

Table of Contents

Advertisement

7. PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE

 When moving the machine, be sure to pull out the plug from the power sup-
ply. Moving the machine with the plug as is inserted can cause the power
WARNING!
cord to be damaged and could result in a fire and or electric shock.
 When moving the machine on the floor, retract the Adjusters and ensure that
Casters make contact with the floor. During transportation, pay careful atten-
tion so that Casters do not tread power cords and earth wires. Damaging the
power cords can cause an electric shock and or short circuit.
 In places where step-like grade differences exist, be sure to separate the PTV,
PTV Cabinet, and the Controller Cabinet. Inclining the PTV as is mounted
on the PTV Cabinet can cause the PTV to fall off from the Base and result in
injury.
 When lifting the cabinet, be sure to hold the grip portions or bottom part.
Lifting the cabinet by holding other portions can damage parts and installation
portions due to the empty weight of the cabinet, and cause personal injury.
 When moving the PTV, do not push it from the rear side. Push it from side-
ways. Pushing the PTV from the rear side can have the PTV fall down,
causing personal injury etc. In case the floor has slanted surfaces or step-like
differences, be sure to move the machine by 2 or more persons.
 When the Cabinet is disassembled, the detached Controller Cabinet may be
unstable.
If it is carelessly pushed, it can fall and cause accidents. When the Control
Cabinet is detached, place it in on a level surface and be careful not to tip it
right or left when moving it.
 Do not move the product with a GD-ROM disc inside. Remove the
GD-ROM disc before moving the product.
CAUTION!
Failure to observe this instruction may cause the GD-ROM disc and/or GD-
ROM drive to be damaged.
 Do not hold or press the plastic parts as indicated by the Figure 7c. Failure to
observe this instruction may break the parts, and eventually the broken pieces
may cause a personal injury.
 When moving the machine, be sure to remove the foot pedals. Moving with
the foot pedals may cause an accident, and deform or damage the part/floor.
www.seuservice.com
42

Advertisement

Table of Contents
loading

Table of Contents