Table of Contents
Advertisement
--------------------------------------------------------------------------------------------------------
Incorrect power source/voltage.
--------------------------------------------------------------------------------------------------------
The Circuit Protector malfunctions due to a power surge.
-------------------------------------------------------------------------------------------------------------------
Sound is not emitted.
--------------------------------------------------------------------------------------------------------
Sound volume adjustment is not correct.
--------------------------------------------------------------------------------------------------------
Sound-related circuit malfunction.
-------------------------------------------------------------------------------------------------------------------
Cards are not dispensed.
--------------------------------------------------------------------------------------------------------
Cards are empty.
--------------------------------------------------------------------------------------------------------
Card jam.
--------------------------------------------------------------------------------------------------------
The connector is not connected properly.
--------------------------------------------------------------------------------------------------------
Card dispenser malfunction.
-------------------------------------------------------------------------------------------------------------------
Cannot scan (read) cards.
--------------------------------------------------------------------------------------------------------
Card reader card slot is dirty.
--------------------------------------------------------------------------------------------------------
The connector is not connected properly.
--------------------------------------------------------------------------------------------------------
Card reader malfunction.
-------------------------------------------------------------------------------------------------------------------
Cannot enter TEST MODE.
--------------------------------------------------------------------------------------------------------
Switch malfunction.
--------------------------------------------------------------------------------------------------------
Game Board abnormality.
--------------------------------------------------------------------------------------------------------
The operation used to change to TEST MODE is incorrect.
-------------------------------------------------------------------------------------------------------------------
Monitor display is abnormal.
--------------------------------------------------------------------------------------------------------
Game Board and monitor connection failure.
--------------------------------------------------------------------------------------------------------
Monitor malfunction.
--------------------------------------------------------------------------------------------------------
Game Board malfunction.
-------------------------------------------------------------------------------------------------------------------
There is no response from control panel buttons.
--------------------------------------------------------------------------------------------------------
Button failure.
「Mushiking#3-eng.doc」 最終印刷日時：2010/01/14 14:19:00
Make sure that the power supply/voltage is correct.
After eliminating the cause of the power surge, restore the
Circuit Protector of the AC Unit. (See next page.)
Adjust the switch unit's sound adjustment volume control.
Perform SOUND TEST.
Refill cards.
Remove the jammed card(s).
Ensure proper connection.
Exchange the card dispenser.
Use the attached cleaning card to clean the card slot.
Ensure proper connection.
Exchange the card reader.
Exchange the switch.
Exchange the Game Board.
Ensure correct operation.
Ensure proper connection (of connector).
Exchange the monitor.
Exchange the Game Board.
Exchange the button(s).
14/17
Advertisement
Table of Contents
