Sega Mushiking Owner's Manual page 47

1. Turn off the main AC unit power switch.
2. Remove the 8 truss screws on the control panel.
FIG. 12-2
1) TRUSS SCREW (8), chrome / M4×12
3. Being careful not to damage the cord, unplug the connector from the
control panel and pull it out of the cabinet.
PHOTO 12-2a
1) CONNECTOR
4. Remove the cord clamp and use nippers to cut the 2 tie belts loose.
PHOTO 12-2b
1) CORD CLAMP
2) Cut with nippers.
5. Unfasten the 4 carriage bolts and 4 flange nuts holding the card reader bracket in place and remove the
card reader from the control panel.
PHOTO 12-2c
1) CARD READER BRACKET
2) CARRIAGE BOLT (4), chrome / M4 x12
3) FLANGE NUT (4) / M4
6. Remove the card reader cover and detach the card reader from the card reader bracket.
1) CARD READER COVER
(P. 46)
13. POWER & I/O BOARD UNIT
[!] WARNING
● When working with the machine, be sure to turn the power off. Working with
the power on can cause an electric shock or a short circuit.
● Be careful not to damage the wires. Damaged wires may cause electric
「Mushiking#3-eng.doc」 最終印刷日時：2010/01/14 14:19:00
3/17