Sega Mushiking Owner's Manual page 6

「Mushiking#1-eng.doc」 最終印刷日時：2010/01/14 14:16:00
● Be sure to perform the periodic maintenance inspections herein stated.
IMPORTANT
(STOP)
● For the IC board circuit inspections, only the logic tester is allowed. The use of
a multiple-purpose tester is not permitted, so be careful in this regard.
● When cleaning the CRT surfaces, use a soft and dry cloth. Do not apply
chemicals such as thinner, benzine, etc.
● Static electricity from your body may damage some electronics devices on
the IC board. Before handling the IC board, touch a grounded metallic surface
so that the static electricity can be discharged.
● Do not turn the power on and off continuously. Repeatedly turning the power
on and off may cause product malfunction or parts damage.
● Some parts are not specifically designed and manufactured for this game
machine. The manufacturers may discontinue, or change the specifications of,
such general-purpose parts. If this is the case, SEGA cannot repair or replace the
damaged game machine, whether or not the warranty period has expired.
(P.3)
CONCERNING THE STICKER DISPLAY
This SEGA product has stickers attached describing the product manufacture No. (Serial No.) and
Electrical Specifications. It also has a Sticker describing where to contact for repair and for purchasing
parts.
When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the
Sticker. The Serial Number indicates the product register. Identical machines could have different parts
depending on the date of production. Also, improvements and modifications might have been made after
the publication of this manual. In order to ensure you order the correct parts, mention the Serial No. when
contacting the applicable places.
CONCERNING WARNING DISPLAYS
This SEGA product has warning displays on stickers, labels and/or printed instructions adhered/attached to
or incorporated in the places where a potentially hazardous situation could arise. The warning displays are
intended for accident prevention for customers and for avoiding hazardous situations relating to
maintenance and servicing work. Some portions of the cabinet contain high voltage and may cause
accidents if touched. When performing maintenance, be very careful of the warning displays. It is
especially important that any complex repair and replacement work not mentioned herein should be
performed by those technical personnel who have knowledge of electricity and technical expertise.
In order to prevent accidents, caution any customer ignoring the warnings to cease and desist immediately.
FIG. 1
1) Serial No. Display
6/27