Sega Mushiking Owner's Manual page 36

「Mushiking#2-eng.doc」 最終印刷日時：2010/01/14 14:18:00
(P. 36)
(3) CRT TEST
Select CRT TEST to display the following screen and check the status of the CRT (monitor).
This test should be run periodically to check the monitor condition.
CRT TEST Screen <1/3>
CRT TEST Screen <2/3>
CRT TEST Screen <3/3>
Pressing the TEST Button will display the "Color Bar", "All Black", and "All White" screens in order.
Press the TEST Button again to return to the Game Test Menu screen.
Refer to Section 15, "MONITOR", for more information on CRT adjustment.
(4) BARCODE READER TEST
Select BARCODE READER TEST to display the following screen and check the status of the barcode
reader. This test should be run periodically to check the condition of the barcode reader.
1) READER TEST Screen
2) Screen showing a "Beetle Card" scan
3) Screen showing a "Skill Card" scan
Scan a "Beetle Card" and a "Skill Card". If scanned correctly, a message will be displayed on the screen
under STATUS.
A failed scan, or scanning cards other than Beetle or Skill cards will result in "------" to be displayed.
Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen.
(5) CARD DISPENSER TEST
9/17