Table of Contents
Advertisement
FIG. 6.1b
1)
CABINET HOLD BRACKET
2)
ADJUSTER
FIG. 6.1c Aligning the Adjusters
1)
CABINET HOLD BRACKET
2)
ADJUSTER
3)
CASTER
4)
Approx. 5 mm
Fasten the nuts in an upward direction.
5)
PHOTO 6.1a Attaching the Cabinet Hold Bracket – Diagram 1
PHOTO 6.1b Attaching the Cabinet Hold Bracket – Diagram 2
FIG. 6.1d
(Scale: 1/100) See the layout for the positioning location.
FIG. 6.1e Ensuring Ventilation Space
1) Ventilation space (15 cm minimum)
(P. 15)
[2] POWER SUPPLY AND EARTH CONNECTION
[!] WARNING
● Be sure to independently use the power supply socket outlet equipped with an
Surge Suppressor. Using a power supply without a Surge Suppressor can cause a
fire when electric leakage occurs.
● Ensure that the "accurately grounded indoor earth terminal" and the earth wire
cable are available (except in the case where a power cord plug with earth is
used). This product is equipped with an earth terminal. Connect the earth
terminal and the indoor earth terminal with the designated cable. If the
grounding work is not performed appropriately, customers can be subjected to
an electric shock, and the product may not function properly.
● Ensure that the power cord and earth wire are not exposed on the surface
(passage, etc.). If exposed, they can be caught and are susceptible to damage.
If damaged, the cord and wire can cause electric shock and short circuit
accidents. Ensure that the wire is not in the customer's way and that the wiring
has protective insulation.
● After wiring the power cord on the floor, be sure to protect the power cord. An
exposed power cord is susceptible to damage and may cause an electric shock.
「Mushiking#1-eng.doc」 最終印刷日時：2010/01/14 14:16:00
16/27
Advertisement
Table of Contents
