Table of Contents
Advertisement
------------------------------------------------------------------------------------------------------------------------
MONITOR (CRT)
In the Monitor Adjustment mode, check to see if Monitor adjustments are appropriate.
------------------------------------------------------------------------------------------------------------------------
IC BOARD
Memory Test.
------------------------------------------------------------------------------------------------------------------------
S/M*: NAOMI Service Manual
(P. 33)
10-1 MAINTENANCE SWITCH UNIT AND COIN METER
[!] WARNING
Never touch places other than those specified. Touching places not specified
can cause electric shock and short circuit accidents.
IMPORTANT
(STOP)
● Adjust the sound to an optimal level, taking into consideration the
environmental requirements of the installation location.
● Removing the Coin Meter circuitry renders the game inoperable.
Maintenance Switch Unit
Open the service door, and the maintenance switch unit shown will appear.
The function of each switch is as follows:
(1) SOUND VOLUME (VOLUME):
(2) POWER SWITCH (POWER):
(3) DEMAGNETIZER BUTTON (DEMAG):
(4) TEST BUTTON (TEST):
(5) SERVICE BUTTON (SERVICE):
「Mushiking#2-eng.doc」 最終印刷日時：2010/01/14 14:18:00
Sound volume can be adjusted for the speakers.
Switch ON/OFF the power supply.
Eliminates the on-screen color unevenness due to
magnetization of CRT. Use this switch first before performing
the monitor's color adjustment.
When operating TEST Button, refer to the following pages.
Gives credits without registering on the coin meter.
6/17
Sections 11, 12, 14
S/M* & Section 15
S/M*
Advertisement
Table of Contents
