Table of Contents
Advertisement
(P. 43)
12. CARD READER (CONTROL PANEL)
[!] CAUTION
● When cleaning the card reader, always use the designated Cleaning Card.
● Do not use chemical detergents such as "glass cleaner" available on the
market or solvents such as thinner, etc.
12-1 HOW TO CLEAN THE CARD READER
1. Insert the Cleaning Card, aligning the cloth side with the red light in
the Card Reader groove.
FIG. 12-1a
1) CLEANING CARD
2) CARD READER
3) Insert with the cloth side facing the correct direction.
2. Slowly slide the Cleaning Card up and down to clean off any accumulated dirt.
After cleaning, refer to "10-3 Game Test Mode, (4) Barcode Reader Test" to test
the functionality.
(P. 40)
12-2 HOW TO REMOVE THE CARD READER
[!] WARNING
● When working with the machine, be sure to turn the power off. Working with
the power on can cause an electric shock or a short circuit.
● Be careful not to damage the wires. Damaged wires may cause electric
shock, short circuit, or present a risk of fire.
● Do not touch undesignated places. Touching these places can cause electric
shock or short circuit.
● This work should be performed by the site maintenance individual or another
skilled professional. Performing work by non-technical personnel can cause
severe accidents such as electric shock.
「Mushiking#3-eng.doc」 最終印刷日時：2010/01/14 14:19:00
2/17
Advertisement
Table of Contents
