Tools Required - ClipperCreek ProMountDuo PMD-10T Installation Manual

Pedestal
Table of Contents

Advertisement

TOOLS REQUIRED FOR ASSEMBLING THE ProMountDuo™
PEDESTAL WITH CLIPPERCREEK HCS, LCS/ACS, OR
TESLA
EVSE
®
The following tools are required for the installation and assembly of the ClipperCreek ProMountDuo™
pedestal components.
Ratcheting Low-Profile Driver with T25 and T30 Torx bits (there are some tight spaces). IF USING
HIGH POWER TOOLS ON THE TORX SCREWS, USE WITH CARE, ON A LOW TORQUE
SETTING, AS THEY MAY STRIP AND/OR DENT THE SURFACES OF THE PEDESTAL.
3/16" Hex Wrench (Allen key)
Socket Wrench (appropriately sized for the customer-supplied Anchor Nuts)
Installers Preferred tools for flexible conduit trimming
Installers Preferred tools for knockout removal
Level
Tape Measure
Base Cardboard Template (included in the ProMountDuo™ packaging; this template can be found and
punched out fom the Cap and Base cardboard packaging)
REQUIRED IF INSTALLING LCS/ACS AND TESLA
TESLA
EVSE only: T10 Torx Driver and T20 Security pin Torx Driver
®
OPTIONAL: ClipperCreek CP-50 EVSE Tester (ClipperCreek part number 0500-03-000)
ProMountDuo™ PEDESTAL INSTALLATION GUIDE:
CLIPPERCREEK HCS, LCS/ACS AND TESLA
CONFIGURATIONS
CONFIGURATION A:
CONFIGURATION B:
CONFIGURATION C:
CONFIGURATION D:
CONFIGURATION E:
CONFIGURATION F:
CONFIGURATION G:
CONFIGURATION H:
CONFIGURATION I:
ProMountDuo™ PEDESTAL INSTALLATION GUIDE
Single ClipperCreek HCS EVSE (dimensions shown in Figure 1)
Dual ClipperCreek HCS EVSE (dimensions shown in Figure 1)
Single ClipperCreek LCS/ACS EVSE (dimensions shown in Figure 2)
Dual ClipperCreek LCS/ACS EVSE (dimensions shown in Figure 2)
Combo ClipperCreek HCS and LCS/ACS EVSE
(extrapolate dimensions using Figure 1 and Figure 2)
EVSE (dimensions shown in Figure 3)
Single TESLA
®
Dual TESLA
EVSE (dimensions shown in Figure 3)
®
Combo ClipperCreek HCS and TESLA
(extrapolate dimensions using Figure 1 and Figure 3 )
Combo ClipperCreek LCS/ACS and TESLA
(extrapolate dimensions using Figure 2 and Figure 3)
EVSE: Silicone for sealing Conduit.
®
EVSE
®
®
Page 7
EVSE
®
EVSE
ClipperCreek
, Inc.

Advertisement

Table of Contents
loading

Table of Contents