Table of Contents
Advertisement
ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek
, Inc.
INITIAL PEDESTAL INSTALLATION
d. To install the second Top Panel
(C), gently nest the narrow edge of
the second Top Panel over the top
of the Bottom Panel (B) and tuck
inside the opposing Top Panel.
e. Finish securing the lower edge
of both Top Panels to the Bottom
Panels using six (6) #10 screw and
washer sets (E) & (I) as before.
Tighten securely, but do not use
such force that would cause the
Panel surface to indent. See Figure
15.
f. Secure the middle and top of both
Top Panels with four (4) of the #10
screw and washer sets (E) & (I) to
increase stability before the next
step. Tighten securely, but do not
use such force that would cause the
Panel surface to indent. See Figure
16.
g. Install the
optional GFCI
kit(s) at this
time per the
instructions
found in
the GFCI
kit box(es).
NOTE: The
GFCI areas
will be very
difficult to
access after
this step.
(continued)
Page 24
Advertisement
Table of Contents
