ClipperCreek ProMountDuo PMD-10T Installation Manual page 12

Pedestal
Table of Contents

Advertisement

ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek
, Inc.
INSTALLATION REQUIREMENTS AND CONFIGURATIONS
(continued)
CONFIGURATION C:
Required Equipment for a Single-Mount Pedestal with one
ClipperCreek LCS/ACS EVSE (One EVSE per Pedestal):
One (1) ClipperCreek ProMountDuo™ Kit, ClipperCreek part number
0300-00-025.
One (1) ClipperCreek LCS/ACS EVSE, part number is determined by
amperage and options selected.
One (1) dedicated branch circuit, voltage dependent upon the EVSE option
selected.
One (1) circuit breaker appropriately sized for the EVSE charging capacity.
Two (2) Live Line conductors that are appropriately sized based on the
EVSE power requirements (5 feet of length is adequate).
One (1) Ground Line conductor with enough length to comfortably pull all
the way through and above the top of the pedestal (5 feet is adequate).
Conduit sized to fit all Live Line and Ground Line conductors.
Four (4) Anchor Bolts with Nuts and Washers (additional washers may be
required for leveling).
CONFIGURATION D:
Required Equipment for a Dual-Mount Pedestal with two
ClipperCreek LCS/ACS EVSE (Two EVSE per Pedestal):
One (1) ClipperCreek ProMountDuo™ Kit, ClipperCreek part number
0300-00-025.
Two (2) ClipperCreek LCS/ACS EVSE, part number is determined by
amperage and options selected.
Two (2) dedicated branch circuits, voltages dependent upon the EVSE option
selected.
Two (2) circuit breakers, appropriately sized with respect to the charging
capacity of each EVSE.
Two pairs (2x2) Live Line conductors (one pair for each EVSE) that are
appropriately sized based on the EVSE power requirements (5 feet of length
is adequate).
Two (2) Ground Line conductors (one for each EVSE) or a single bonded
Ground Line with enough length to comfortably pull all the way through and
above the top of the pedestal (5 feet is adequate).
Conduit sized to fit all Live Line and Ground Line conductors.
Four (4) Anchor Bolts with Nuts and Washers (additional washers may be
required for leveling).
Page 12
CONFIGURATION C
Single ClipperCreek
LCS/ACS EVSE
CONFIGURATION D
Dual ClipperCreek
LCS/ACS EVSE

Advertisement

Table of Contents
loading

Table of Contents