Mechanical Installation; Emc Precautions; Vlt ® 5000 Parameter Group - Danfoss vlt series Operating Instructions Manual

How to Install
3. Push the option into place. Two positions are
possible, with cable terminal facing either up or
down. The cable up position is often most
suitable when several frequency converters are
installed side by side in a rack, as this position
permits shorter cable lengths.
3 3

3.2.1 Mechanical Installation

To ease the replacement of VLT 5000 with VLT
adapter plates have the same footprints as VLT 5000 and have threaded holes for VLT
adapter plate prevents damage that can occur from drilling new threaded holes in the backboard of the enclosure. The
adapter plate also decreases the time required to exchange a broken frequency converter.
The following mechanical adapter plates are available:
Ordering
number
130B0183
130B0184
130B0185
Table 3.2 Mechanical Installation for VLT

3.3 EMC Precautions

To achieve interference-free operation of the PROFIBUS:
•
Maintain high distance (min. 200 mm [8"])
between the PROFIBUS communication cable and
the motor and brake resistor cables to avoid
coupling of high frequency noise from one cable
to the other.
•
When crossing is unavoidable, ensure that the
PROFIBUS cable crosses motor and brake resistor
cables at an angle of 90 degrees.
NOTICE
Observe relevant national and local regulations, for
example regarding protective earth connection.
8
VLT
®
Style Height [mm]
Bookstyle, IP20 395
Bookstyle, IP20 395
Compact, IP20 395
®
5000
®
AutomationDrive FC 302 PROFIBUS Converter Operating Instructions
4. Push the fieldbus option adaptor frame for the FC
302 into place.
5. Remount the LCP.
6. Attach the cable.
7. Fasten the cable using cable holders.
AutomationDrive FC 302, there is a number of adapter plates available. The
Width [mm]
90
130
220
Min.200mm
90° crossing
Illustration 3.4 Correct EMC Installation
MG34N202 - Rev. 2013-10-15
®
AutomationDrive FC 302. The
Type
5001-5003 200-240 V
5001-5005 380-500 V
5004-5006 200-240 V
5006-5011 380-500 V
5001-5003 200-240 V
5001-5005 380-500 V
5004-5006 200-240 V
5006-5011 380-500 V
5001-5011 550-600 V