Enabling Automatic Subscriber-To-Subscriber Messaging In Secured Mode; Setting Up Message Waiting Indication; Setting Up Automatic Number Identification (Ani) - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
2.10
2.11
2.12
8 - 6
Enabling Automatic Subscriber-to-Subscriber Messaging in
Secured Mode
By default, automatic subscriber-to-subscriber messaging is enabled in
unsecured mode for all subscribers. To enable this feature in secured mode, do
this procedure.
1. Log on to the Web administration console, then go to System > Switch >
Switch Information.
2. In the Integration options field, type ISM=2.
3. Click Save.

Setting Up Message Waiting Indication

By default, message waiting indication is enabled for all subscribers. Use the
following procedure to verify MWI settings.
1. Log on to the Web administration console, then go to System > Switch >
MWI.
2. Confirm that the On (activation) code and Off (deactivation) code fields
contain an X.
3. Click Save.

Setting Up Automatic Number Identification (ANI)

To use ANI, you must activate the MF receiver built-in to the SV8300 CPU.
Refer to the phone system documentation for details on setting up ANI.
NOTE
Setting up ANI overrides the Gather phone number call screening option, which asks
callers to manually enter their phone number before routing the call.
The phone system is now configured for basic digital integration.
Setting Up Integration (SV8300)
UM8000