Removing Language Packs - NEC Univerge UM8000 Installation Manual

UM8000
3.2
Installation Manual
6. Choose the language file.
7. Click Open. The Choose file dialog box closes, the Install Language
button appears on the Languages page.
8. Click Install Language. The
minutes for the language pack to install.
The following message appears when the language has been installed:
Changes to the voice messaging system have been made. This requires the
voice messaging software to be restarted. Restart the voice mail software
after all system changes have been completed.
9. Click Restart, to restart the voice messaging software. The Server
control page appears, both the Start and Stop buttons are greyed out
while the server shuts down.
10. Reprogram the phone system.

Removing Language Packs

To remove the language packs:
1. Start the Web administration console.
The the Web administration console appears.
NOTE
The voice messaging software must be stopped to remove language
packs.
2. Click Server Control. The Server control page appears.
3. Click Stop. The voice messaging software shuts down.
4. Under
Quick Links
installed language packs appear on the languages page.
5. To remove a language, click the Remove next to the language.
6. Under
Quick Links
appears.
7. On the Server Control page, click Start to restart the voice messaging
system.
Updating...
, click System Configuration > Languages. The
, click Server Control. The Server control page
Issue No. 1.0
button appears. It takes a few
14 - 3