NEC Univerge UM8000 Installation Manual page 90

Issue No. 1.0
Next step...
◆
10 - 8
4. Click E-mail.
The subscriber e-mail settings appear.
5. In the e-mail address field, type the subscriber full e-mail address. For
example: name@company.com.
6. Choose a Server type from the drop-down list: POP3 or IMAP.
7. In the Server name field, type the server IP address or server name.
8. In the User name field, type the subscriber system ID used to attempt
authentication with the e-mail server. For example: POP access requires
a full e-mail address, while Microsoft Exchange server with IMAP does
not.
9. If appropriate, make sure the Use SSL check box is checked, for SSL
authentication.
When the SSL check box is checked, the port number 993 appears in the
field.
10. In the Port field, type 143 for IMAP; 110 for POP3; or the appropriate
value for the e-mail server.
NOTE
For subscriber e-mail integration to work, the subscriber must have
appropriate access options. Access to e-mail messages from voice mail
or fax/voice e-mail forwarding or notification.
11. If the e-mail system uses authentication, check the Use authentication
check box, then choose the authentication type from the drop-down list.
12. Click the Save icon.
Repeat this procedure for each existing subscriber. Use the Next, Previous, or
Find Subscriber icons to display the subscriber profile.
Test the e-mail integration.
UM8000
E-mail Integration