Night Service (Manual/Auto); Automatic Mode Switching - NEC AK-308 User Manual

Night Service (Manual/Auto)

Night Service puts the night audible (ringing) assignment into effect manually or automatically. Incoming
calls on a specific line group will ring at extensions that are assigned night audible for that line group. Night
Service remains set even if the system power is turned off.
Night Service is available on a system basis or incoming line group basis according to programming.
1. Night audible assignments go into effect at all extensions in the system. Day audible assignments are
ignored. The extension #10 can activate this Night Service (NT) mode.
2. Night audible assignments go into effect for the extensions that have the same primary incoming line
group as the extension that activates this NT mode. Extensions with a different primary incoming line
group receive ringing according to their day audible assignments. Any extension can activate this mode.
This NT mode can be activated by any extension in each same primary incoming line group.

Automatic Mode Switching

Automatic Mode Switching allows to switch Day/Night mode according to preprogrammed time routine for
the system. When Automatic Mode Switching places the system in Night Mode, TRFR blinks red at all key
telephones. If the system mode is switched manually at No.10 telephone, it overrides Automatic Mode
Switching assignment.
To activate Night Service:
To cancel Night Service:
Note1:This feature can be stored under the One-touch key.
Note2:When NT mode 1 is enabled, the TRFR key lights steadily at all KTSs. When NT mode 2 is enabled, the
TRFR key lights steadily at the activating extension and at all other KTSs with the same primary incoming
line group.
Trunk Incoming Call
SPK
1. Press key.
TRFR
2. Press key.
3. Dial # . TRFR lights red.
4. Hang up.
SPK
1. Press key.
TRFR
2. Press key.
3. Dial # . TRFR extinguishes.
4. Hang up.
15