Using Winscp; Running Winscp - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
2.2
2 - 2
11. Accept the default additional task settings, then click Next.
The Initial user settings page appears.
12. Select one of the user interface styles, then click Next. All WinSCP
procedures in this document assume that the Norton Commander
interface is being used.
Interface Style
Norton Commander
(Preferred Option)
Explorer-like
The Ready to Install page appears.
13. Verify that the settings are correct, then click Install.
To review or change any of the settings, click Back.
When the installation is complete, the Completing WinSCP3 Setup Wizard
page appears.
14. Clear the Start WinSCP now check box, then click

Using WinSCP

The following instructions assume that WinSCP is installed on a computer
running the Windows XP operating system.
2.2.1

Running WinSCP

The following procedure provides instructions to run WinSCP:
1. Click Start > Programs > WinSCP3 > WinSCP.
The WinSCP Login window appears.
Description
Displays source computer directories in the left pane
and destination computer directories in the right pane.
Displays directories in the left pane and files in the
right pane.
UM8000
.
Finish
WinSCP and PuTTY